CBAM default values · Albania

CBAM default values for Albania. Including the ones that are not Albanian.

Albania has its own table in Annex I, but it is short: cement, fertilisers, hydrogen and, since the August 2026 correction, high-carbon ferro-chromium. Albanian steel and aluminium have no rows of their own, so an importer without your data takes the higher “other countries” value.

Country table in Annex IFerro-chromium added by IR (EU) 2026/1740Steel and aluminium fall back

Last updated: 4 November 2026 · Values checked on EUR-Lex

Karbon360 calculation trace for a good: specific embedded emissions, the formula, the system boundary and the inventory streams behind it
2.350
tCO₂e/t for ferro-chromium over 4% carbon (CN 7202 41), added for Albania by the August 2026 correction.
0.870
tCO₂e/t for grey clinker, with indirect emissions printed as 0.000.
3.996
tCO₂e/t for Albanian reinforcing bar, taken from the other countries table.
14.030
tCO₂e/t for hydrogen (CN 2804 10 00) in the Albania table.
01 · How it applies

How the Albania table works.

Coverage

What the Albania table covers

The Albania table gives values for grey clinker and grey cements (route (A)), the nitrogen fertilisers, hydrogen and one ferro-alloy: ferro-chromium with more than 4% carbon. White clinker, white cements, aluminous cement, calcined clay and anhydrous ammonia show “–”.

There are no rows for aluminium and none for iron and steel products. For those goods, and for every “–” field, Annex I directs the importer to the “Other countries and territories” table.

Correction

Ferro-chromium and the August 2026 correction

In the version of Annex I published on 31 December 2025, Albania had no value for CN 7202 41. Implementing Regulation (EU) 2026/1740 recognised that the value had been omitted by a transcription mistake and added it, retroactively from 1 January 2026. Albanian high-carbon ferro-chromium therefore carries 2.350 tCO₂e/t from the Albania table. Low-carbon ferro-chromium (7202 49) still falls back to the other countries value of 2.870.

Steel

Why Albanian steel is expensive on defaults

Without an Albanian steel table, reinforcing bar from an Albanian plant takes 3.996 tCO₂e/t on route (C), the blast furnace route. With the mark-up that is 4.396 in 2026, 4.795 in 2027 and 5.195 from 2028. A plant that melts scrap in an electric arc furnace, or only rolls bought-in billets, works on a different route from the one the default assumes, and has every reason to give its buyer actual data instead. Steel is charged on direct emissions only, so the gap sits in the plant’s own fuel and process emissions.

02 · Cement

Cement default values, Albania.

Cement is charged on direct plus indirect emissions. Route (A) is grey clinker and cement.

Cement (tCO₂e per tonne of good)

Albania table
CN / TARICGoodDirectIndirectTotal2026 · +10%2027 · +20%2028+ · +30%Route
2523 10 00 90Grey clinker (and other clinker)0.8700.0000.8700.9571.0441.131(A)
2523 29 00Grey Portland cement0.9000.0300.9301.0231.1161.209—
2523 90 00 90Grey hydraulic cements (and other)0.8600.0300.8900.9791.0681.157(A)
Source: Implementing Regulation (EU) 2025/2621, Annex I, table “Albania”, as replaced by Implementing Regulation (EU) 2026/1740 (OJ L, 31.7.2026), applicable from 1 January 2026. Units: tCO₂e per tonne of good. The base value is the Annex’s “total emissions” column; the mark-up columns are calculated by Karbon360 from it, and the CBAM Registry performs the official calculation. Checked on EUR-Lex on 4 November 2026.
03 · Ferro-alloys

Ferro-chromium default value, Albania.

The only iron and steel row in the Albania table. Indirect emissions are N/A.

Ferro-alloys (tCO₂e per tonne of good)

Albania table
CN codeGoodDefault (tCO₂e/t)2026 · +10%2027 · +20%2028+ · +30%Route
7202 41Ferro-chromium, over 4% carbon2.3502.5852.8203.055—
Source: Implementing Regulation (EU) 2025/2621, Annex I, table “Albania”, as replaced by Implementing Regulation (EU) 2026/1740 (OJ L, 31.7.2026), applicable from 1 January 2026. Units: tCO₂e per tonne of good. The base value is the Annex’s “total emissions” column; the mark-up columns are calculated by Karbon360 from it, and the CBAM Registry performs the official calculation. Checked on EUR-Lex on 4 November 2026.
04 · Fertilisers

Fertiliser default values, Albania.

A selection of the nitrogen fertilisers in the table. Fertilisers carry a flat 1% mark-up from 2026 onwards.

Fertilisers (tCO₂e per tonne of good)

Albania table
CN codeGoodDirectIndirectTotal2026 onwards · +1%
2808 00 00Nitric acid; sulphonitric acids2.7300.0402.7602.788
2814 20 00Ammonia in aqueous solution0.6500.0300.6800.687
3102 10 19Urea, over 45% nitrogen1.3300.0801.4201.434
3102 21 00Ammonium sulphate0.6000.0600.6700.677
3102 30 90Ammonium nitrate2.5400.0802.6202.646
3102 40 10Ammonium nitrate–calcium carbonate mixtures (28% N or less)2.1500.0802.2202.242
3102 80 00Urea–ammonium nitrate solution1.5600.0701.6201.636
3105 20 90NPK fertilisers (10% N or less)0.7100.0600.7700.778
3105 30 00Diammonium phosphate (DAP)0.5000.0500.5500.556
Source: Implementing Regulation (EU) 2025/2621, Annex I, table “Albania”, as replaced by Implementing Regulation (EU) 2026/1740 (OJ L, 31.7.2026), applicable from 1 January 2026. Units: tCO₂e per tonne of good. The base value is the Annex’s “total emissions” column; the mark-up columns are calculated by Karbon360 from it, and the CBAM Registry performs the official calculation. Checked on EUR-Lex on 4 November 2026.
05 · Steel

Albanian steel uses the other countries table.

No Albanian rows exist for these goods, so these values apply. Direct emissions only.

Iron and steel (tCO₂e per tonne of good)

Other countries table
CN codeGoodDefault (tCO₂e/t)2026 · +10%2027 · +20%2028+ · +30%Route
7206 10 00Ingots of iron and non-alloy steel3.7504.1254.5004.875(C)
7213Wire rod, hot-rolled, in coils3.9964.3964.7955.195(C)
7214 20 00Reinforcing bar (ribbed, deformed in rolling)3.9964.3964.7955.195(C)
7216Angles, shapes and sections3.9964.3964.7955.195(C)
7217 10Wire, not plated or coated3.9964.3964.7955.195(C)
7308Structures and parts of structures5.0645.5706.0776.583(C)
7202 49Ferro-chromium, 4% carbon or less2.8703.1573.4443.731—
Source: Implementing Regulation (EU) 2025/2621, Annex I, table “Other countries and territories”, as replaced by Implementing Regulation (EU) 2026/1740 (OJ L, 31.7.2026), applicable from 1 January 2026. Units: tCO₂e per tonne of good. The base value is the Annex’s “total emissions” column; the mark-up columns are calculated by Karbon360 from it, and the CBAM Registry performs the official calculation. Checked on EUR-Lex on 4 November 2026.
06 · Aluminium

Albanian aluminium uses the other countries table.

No Albanian aluminium rows exist, so these values apply. Direct emissions only.

Aluminium (tCO₂e per tonne of good)

Other countries table
CN codeGoodDefault (tCO₂e/t)2026 · +10%2027 · +20%2028+ · +30%Route
7601Unwrought aluminium2.2032.4232.6442.864(K)
7604 10 90Profiles3.2513.5763.9014.226(K)
7608Tubes and pipes3.2203.5423.8644.186(K)
7610 10 00Doors, windows and their frames3.2123.5333.8544.176(K)
Source: Implementing Regulation (EU) 2025/2621, Annex I, table “Other countries and territories”, as replaced by Implementing Regulation (EU) 2026/1740 (OJ L, 31.7.2026), applicable from 1 January 2026. Units: tCO₂e per tonne of good. The base value is the Annex’s “total emissions” column; the mark-up columns are calculated by Karbon360 from it, and the CBAM Registry performs the official calculation. Checked on EUR-Lex on 4 November 2026.
Compare

Your actual SEE, next to the default your buyer would use.

Karbon360 calculates specific embedded emissions per CN code from your installation’s records, under Implementing Regulation (EU) 2025/2547, and shows the default that applies to your good beside it, whether that comes from the Albania table or the other countries table.

  • Albania and other countries defaults built in
  • Fallback rule applied per CN code
  • Trace PDF for your buyer’s verifier
The Karbon360 CBAM overview: covered goods, specific embedded emissions per CN code, completeness checks and the certificate cost curve
Questions

Frequently asked questions

Does Albania have CBAM default values for steel?

Only for high-carbon ferro-chromium (CN 7202 41, 2.350 tCO₂e per tonne). Other iron and steel goods have no Albanian rows, so the “Other countries and territories” values apply, for example 3.996 for reinforcing bar.

What changed for Albania in the August 2026 correction?

Implementing Regulation (EU) 2026/1740 added the missing Albanian value for ferro-chromium over 4% carbon and replaced Annex I in full, applicable from 1 January 2026. It also removed the printed mark-up columns for all countries.

Why is the indirect value for Albanian clinker 0.000?

That is the figure printed in the Albania table for grey clinker. Cement goods are charged on direct plus indirect emissions, so the total for grey clinker equals its direct value of 0.870.

What is the default for Albanian aluminium profiles?

Albania has no aluminium rows, so profiles (CN 7604 10 90) take the other countries value of 3.251 tCO₂e per tonne, or 3.576 with the 2026 mark-up.

Do not let your goods be priced on someone else’s table.

Your installation’s records, the default your buyer would otherwise use and the mark-up for each year, side by side, with the trace attached.